Bibliometric Analysis: Research on Batik in International Publications
Keywords:
Batik, Bibiliometrics, VOSviewer, Scopus, Science Mapping
Abstract
Batik is an Indonesian cultural tradition that carries profound philosophical meanings embedded in its patterns and high artistic value. This is evident from its early origins when batik was used within a very limited keraton environment. Now it has become a commodity of the Indonesian creative industry that has ventured into the global market. This paper addresses the following issues: the annual number of international scholarly publications in the field of batik to be published in Scopus, the productivity of researchers working in the field of batik, and the methodology for using keywords to map the development of international research publications on batik. Based on the discussion and simulation using VOSviewer software, it can be concluded that the development and growth, especially in the field of batik, from 2012 – 2022, indexed in Scopus, reached 213 publications (18.73%) in 2020. The majority of publications in the field of batik were published in the IOP Conference Series: Earth and Environmental Science. Diponegoro University is the institution that has published the most research in the field of batik, and Indonesia is one of the countries with the highest contributors. The researcher with high productivity in the field of batik is Widiaty, I, with a total of 15 publications from 2012 to 2022, specifically in the field of batik. Regarding the development map of the field of batik based on co-word analysis, there are 7 clusters, where new research topics are identified that can still be further developed, especially in the field of batik.
References
[1] H. Nugroho, “PRESS RELEASE HARI BATIK NASIONAL TAHUN 2020,” Balai Besar Kerajinan dan Batik, Jul. 10, 2020. Accessed: Dec. 17, 2022. [Online]. Available: https://www.batik.go.id/index.php/post/read/press_release__hari_batik_nasional_tahun_2020_0
[2] I. Santosa, “Bangga Batik Indonesia yang Mendunia,” Maranatha News, Apr. 10, 2021. Accessed: Dec. 17, 2022. [Online]. Available: https://news.maranatha.edu/featured/bangga-batik-indonesia-yang-mendunia/
[3] K. P. Kemnperin, “Serap 200 Ribu Tenaga Kerja, Ekspor Industri Batik Tembus USD 533 Juta,” Kementrian Perindustrian, Jun. 10, 2021. Accessed: Dec. 18, 2022. [Online]. Available: https://www.kemenperin.go.id/artikel/22830/Serap-200-Ribu-Tenaga-Kerja,-Ekspor-Industri-Batik-Tembus-USD-533-Juta
[4] W. Wibawanto and R. Nugrahani, “INOVASI PENGEMBANGAN MOTIF BATIK DIGITAL BAGI IKM BATIK SEMARANG,” 2018.
[5] R. Andreswari, N. Ambarsari, A. Syahrina, W. Puspitasari, A. Novianti, and I. Darmawan, “Design of e-Marketplace for Village-owned Small, Micro and Medium Enterprise using Rapid Application Development,” IJIES, vol. 4, no. 01, pp. 35–43, Jan. 2020, doi: 10.25124/ijies.v4i01.46.
[6] E. Ridanasti and T. M. Amin, “Pendampingan Regenerasi Pengrajin Batik di Desa Kebon Bayat Kabupaten Klaten,” vol. 9, pp. 25–29, 2022.
[7] S. Ratnawati and N. U. Ati, “Pelatihan dan Pendampingan UMKM Batik Tulis di Desa Jabaran Kecamatan Balongbendo Kabupaten Sidoarjo,” abdidas, vol. 2, no. 2, pp. 383–391, Apr. 2021, doi: 10.31004/abdidas.v2i2.287.
[8] D. I. Rinawati, D. P. Sari, S. N. W.P., F. Muljadi, and S. P. Lestari, “PENGELOLAAN PRODUKSI MENGGUNAKAN PENDEKATAN LEAN AND GREEN UNTUK MENUJU INDUSTRI BATIK YANG BERKELANJUTAN (STUDI KASUS DI UKM BATIK PUSPA KENCANA),” JURNAL TEKNIK INDUSTRI, vol. 8, no. 1, pp. 43–50, Apr. 2013, doi: 10.12777/jati.8.1.43-50.
[9] D. S. E. Atmaja and M. K. Herliansyah, “OPTIMASI PROSES PENGUKURAN DIMENSI DAN DEFECT UBIN KERAMIK MENGGUNAKAN PENGOLAHAN CITRA DIGITAL DAN FULL FACTORIAL DESIGN,” teknosains, vol. 4, no. 2, Jun. 2015, doi: 10.22146/teknosains.7972.
[10] M. D. Prasetio, “An Approaching Machine Learning Model: Tile Inspection Case Study,” IJIES, vol. 4, no. 01, pp. 12–22, Jan. 2020, doi: 10.25124/ijies.v4i01.44.
[11] X. Guosheng, X. Yang, Y. Zhiqi, and S. Yize, “An intelligent defect detection system for warp-knitted fabric,” Textile Research Journal, vol. 92, no. 9–10, pp. 1394–1404, May 2022, doi: 10.1177/00405175211060084.
[12] J. J. Kim, A.-R. Kim, and S.-W. Lee, “Artificial Neural Network-Based Automated Crack Detection and Analysis for the Inspection of Concrete Structures,” Applied Sciences, vol. 10, no. 22, p. 8105, Nov. 2020, doi: 10.3390/app10228105.
[13] T. Mahmood, R. Ashraf, and C. M. N. Faisal, “An efficient scheme for the detection of defective parts in fabric images using image processing,” The Journal of The Textile Institute, pp. 1–9, Jul. 2022, doi: 10.1080/00405000.2022.2105114.
[14] J. Xiang, R. Pan, and W. Gao, “Online Detection of Fabric Defects Based on Improved CenterNet with Deformable Convolution,” Sensors, vol. 22, no. 13, p. 4718, Jun. 2022, doi: 10.3390/s22134718.
[15] A. M. Fauzi and R. L. Defianisa, “Analysis for cleaner production implementation strategy in batik industry in Bogor,” in IOP Conf. Ser. Earth Environ. Sci., Robo S., Yugiswara R.S., and Lestari D.F., Eds., Institute of Physics Publishing, 2019. doi: 10.1088/1755-1315/325/1/012005.
[16] L. Herlinawati, “BATIK CIAMISAN DI IMBANAGARA KABUPATEN CIAMIS (Sebuah Kajian Nilai Budaya),” PATANJALA, vol. 4, no. 3, p. 446, Sep. 2012, doi: 10.30959/patanjala.v4i3.158.
[17] S. Irvan and A. Sudiarso, “Analisis desain mesin CNC batik tulis,” Universitas Gadjah Mada, 2019, Accessed: Oct. 06, 2023. [Online]. Available: http://etd.repository.ugm.ac.id/penelitian/detail/181922
[18] M. A. Wibisono, I. G. B. B. Dharma, A. Suwastono, and M. A. Imani, “INTEGRASI DESAIN DAN MANUFAKTUR BATIK CAP,” Jurnal i-lib UGM, 2012, Accessed: Jun. 20, 2023. [Online]. Available: http://i-lib.ugm.ac.id/jurnal/download.php?dataId=11844
[19] T. B. Dwinugroho, D. Y. H. Kumarajati, Kurniawanti, and Y. T. Hapsari, “Design and Implementation of CNC (Computer Numerical Control) Based Automatic Stamp Batik Machine Program with Automatic Gripper Using Mach 3,” in J. Phys. Conf. Ser., Institute of Physics Publishing, 2019. doi: 10.1088/1742-6596/1254/1/012069.
[20] M. Hanif, M. A. Wibisono, and I. G. B. B. Dharma, “Perancangan Mesin Batik Cap Otomatis Tipe Modul Cap Bergerak,” Prosiding Seminar Nasional Teknik Industri Universitas Gadjah Mada, pp. 87–94, 2017.
[21] R. Kusumawardani and A. Sudiarso, “Perancangan Motif dan Produksi Batik Tulis pada Mesin CNC Batik Tulis untuk Meminimalkan Waktu Pembatikan,” Universitas Gadjah Mada, 2018, Accessed: Jun. 14, 2023. [Online]. Available: http://etd.repository.ugm.ac.id/home/detail_pencarian/163259
[22] P. Devos, “Research and bibliometrics: A long history…,” Clinics and Research in Hepatology and Gastroenterology, vol. 35, no. 5, pp. 336–337, May 2011, doi: 10.1016/j.clinre.2011.04.008.
[23] H. Halepoto, T. Gong, S. Noor, and H. Memon, “Bibliometric Analysis of Artificial Intelligence in Textiles,” Materials, vol. 15, no. 8, p. 2910, Apr. 2022, doi: 10.3390/ma15082910.
[24] L. Waltman, N. J. van Eck, and E. C. M. Noyons, “A unified approach to mapping and clustering of bibliometric networks,” Journal of Informetrics, vol. 4, no. 4, pp. 629–635, Oct. 2010, doi: 10.1016/j.joi.2010.07.002.
[25] T. Tupan, R. N. Rahayu, R. Rachmawati, and E. S. R. Rahayu, “ANALISIS BIBLIOMETRIK PERKEMBANGAN PENELITIAN BIDANG ILMU INSTRUMENTASI,” baca.j.dok.inf., vol. 39, no. 2, p. 135, Dec. 2018, doi: 10.14203/j.baca.v39i2.413.
[26] B. Üsdiken and Y. Pasadeos, “Organizational Analysis in North America and Europe: A Comparison of Co-citation Networks,” Organization Studies, vol. 16, no. 3, pp. 503–5026, 1995, doi: 10.1177/017084069501600306.
[27] M. J. Cobo, A. G. Lopez-Herrera, E. Herrera-Viedma, and F. Herrera, “Science mapping software tools: Review, analysis, and cooperative study among tools,” JOURNAL OF THE AMERICAN SOCIETY FOR INFORMATION SCIENCE AND TECHNOLOGY, 2011.
[28] W. Glanzel, BIBLIOMETRICS AS A RESEARCH FIELD A course on theory and application of bibliometric indicators. 2003. Accessed: Dec. 18, 2022. [Online]. Available: http://nsdl.niscair.res.in/jspui/handle/123456789/968
[29] L. Leydesdorff and I. Rafols, “Interactive overlays: A new method for generating global journal maps from Web-of-Science data,” Journal of Informetrics, vol. 6, no. 2, pp. 318–332, Apr. 2012, doi: 10.1016/j.joi.2011.11.003.
[30] N. J. van Eck and L. Waltman, “Software survey: VOSviewer, a computer program for bibliometric mapping,” Scientometrics, vol. 84, no. 2, pp. 523–538, Aug. 2010, doi: 10.1007/s11192-009-0146-3.
[31] A. E. Minarno, A. S. Maulani, A. Kurniawardhani, F. Bimantoro, and N. Suciati, “Comparison of methods for Batik classification using multi texton histogram,” Telkomnika Telecomun. Compt. Electr. Control, vol. 16, no. 3, pp. 1358–1366, 2018, doi: 10.12928/TELKOMNIKA.v16i3.7376.
[32] A. E. Minarno, Y. Azhar, F. D. Setiawan Sumadi, and Y. Munarko, “A Robust Batik Image Classification using Multi Texton Co-Occurrence Descriptor and Support Vector Machine,” in Int. Conf. Intell. Auton. Syst., ICoIAS, Institute of Electrical and Electronics Engineers Inc., 2020, pp. 51–55. doi: 10.1109/ICoIAS49312.2020.9081833.
[33] A. E. Minarno, F. D. S. Sumadi, H. Wibowo, and Y. Munarko, “Classification of batik patterns using K-nearest neighbor and support vector machine,” Bull. Electr. Eng. Inform., vol. 9, no. 3, pp. 1260–1267, 2020, doi: 10.11591/eei.v9i3.1971.
[34] A. E. Minarno, F. D. S. Sumadi, Y. Munarko, W. Y. Alviansyah, and Y. Azhar, “Image Retrieval using Multi Texton Co-occurrence Descriptor and Discrete Wavelet Transform,” in Int. Conf. Inf. Commun. Technol., ICoICT, Institute of Electrical and Electronics Engineers Inc., 2020. doi: 10.1109/ICoICT49345.2020.9166361.
[35] A. E. Minarno, M. C. Mustaqim, Y. Azhar, W. A. Kusuma, and Y. Munarko, “Deep Convolutional Generative Adversarial Network Application in Batik Pattern Generator,” in Int. Conf. Inf. Commun. Technol., ICoICT, Institute of Electrical and Electronics Engineers Inc., 2021, pp. 54–59. doi: 10.1109/ICoICT52021.2021.9527514.
[2] I. Santosa, “Bangga Batik Indonesia yang Mendunia,” Maranatha News, Apr. 10, 2021. Accessed: Dec. 17, 2022. [Online]. Available: https://news.maranatha.edu/featured/bangga-batik-indonesia-yang-mendunia/
[3] K. P. Kemnperin, “Serap 200 Ribu Tenaga Kerja, Ekspor Industri Batik Tembus USD 533 Juta,” Kementrian Perindustrian, Jun. 10, 2021. Accessed: Dec. 18, 2022. [Online]. Available: https://www.kemenperin.go.id/artikel/22830/Serap-200-Ribu-Tenaga-Kerja,-Ekspor-Industri-Batik-Tembus-USD-533-Juta
[4] W. Wibawanto and R. Nugrahani, “INOVASI PENGEMBANGAN MOTIF BATIK DIGITAL BAGI IKM BATIK SEMARANG,” 2018.
[5] R. Andreswari, N. Ambarsari, A. Syahrina, W. Puspitasari, A. Novianti, and I. Darmawan, “Design of e-Marketplace for Village-owned Small, Micro and Medium Enterprise using Rapid Application Development,” IJIES, vol. 4, no. 01, pp. 35–43, Jan. 2020, doi: 10.25124/ijies.v4i01.46.
[6] E. Ridanasti and T. M. Amin, “Pendampingan Regenerasi Pengrajin Batik di Desa Kebon Bayat Kabupaten Klaten,” vol. 9, pp. 25–29, 2022.
[7] S. Ratnawati and N. U. Ati, “Pelatihan dan Pendampingan UMKM Batik Tulis di Desa Jabaran Kecamatan Balongbendo Kabupaten Sidoarjo,” abdidas, vol. 2, no. 2, pp. 383–391, Apr. 2021, doi: 10.31004/abdidas.v2i2.287.
[8] D. I. Rinawati, D. P. Sari, S. N. W.P., F. Muljadi, and S. P. Lestari, “PENGELOLAAN PRODUKSI MENGGUNAKAN PENDEKATAN LEAN AND GREEN UNTUK MENUJU INDUSTRI BATIK YANG BERKELANJUTAN (STUDI KASUS DI UKM BATIK PUSPA KENCANA),” JURNAL TEKNIK INDUSTRI, vol. 8, no. 1, pp. 43–50, Apr. 2013, doi: 10.12777/jati.8.1.43-50.
[9] D. S. E. Atmaja and M. K. Herliansyah, “OPTIMASI PROSES PENGUKURAN DIMENSI DAN DEFECT UBIN KERAMIK MENGGUNAKAN PENGOLAHAN CITRA DIGITAL DAN FULL FACTORIAL DESIGN,” teknosains, vol. 4, no. 2, Jun. 2015, doi: 10.22146/teknosains.7972.
[10] M. D. Prasetio, “An Approaching Machine Learning Model: Tile Inspection Case Study,” IJIES, vol. 4, no. 01, pp. 12–22, Jan. 2020, doi: 10.25124/ijies.v4i01.44.
[11] X. Guosheng, X. Yang, Y. Zhiqi, and S. Yize, “An intelligent defect detection system for warp-knitted fabric,” Textile Research Journal, vol. 92, no. 9–10, pp. 1394–1404, May 2022, doi: 10.1177/00405175211060084.
[12] J. J. Kim, A.-R. Kim, and S.-W. Lee, “Artificial Neural Network-Based Automated Crack Detection and Analysis for the Inspection of Concrete Structures,” Applied Sciences, vol. 10, no. 22, p. 8105, Nov. 2020, doi: 10.3390/app10228105.
[13] T. Mahmood, R. Ashraf, and C. M. N. Faisal, “An efficient scheme for the detection of defective parts in fabric images using image processing,” The Journal of The Textile Institute, pp. 1–9, Jul. 2022, doi: 10.1080/00405000.2022.2105114.
[14] J. Xiang, R. Pan, and W. Gao, “Online Detection of Fabric Defects Based on Improved CenterNet with Deformable Convolution,” Sensors, vol. 22, no. 13, p. 4718, Jun. 2022, doi: 10.3390/s22134718.
[15] A. M. Fauzi and R. L. Defianisa, “Analysis for cleaner production implementation strategy in batik industry in Bogor,” in IOP Conf. Ser. Earth Environ. Sci., Robo S., Yugiswara R.S., and Lestari D.F., Eds., Institute of Physics Publishing, 2019. doi: 10.1088/1755-1315/325/1/012005.
[16] L. Herlinawati, “BATIK CIAMISAN DI IMBANAGARA KABUPATEN CIAMIS (Sebuah Kajian Nilai Budaya),” PATANJALA, vol. 4, no. 3, p. 446, Sep. 2012, doi: 10.30959/patanjala.v4i3.158.
[17] S. Irvan and A. Sudiarso, “Analisis desain mesin CNC batik tulis,” Universitas Gadjah Mada, 2019, Accessed: Oct. 06, 2023. [Online]. Available: http://etd.repository.ugm.ac.id/penelitian/detail/181922
[18] M. A. Wibisono, I. G. B. B. Dharma, A. Suwastono, and M. A. Imani, “INTEGRASI DESAIN DAN MANUFAKTUR BATIK CAP,” Jurnal i-lib UGM, 2012, Accessed: Jun. 20, 2023. [Online]. Available: http://i-lib.ugm.ac.id/jurnal/download.php?dataId=11844
[19] T. B. Dwinugroho, D. Y. H. Kumarajati, Kurniawanti, and Y. T. Hapsari, “Design and Implementation of CNC (Computer Numerical Control) Based Automatic Stamp Batik Machine Program with Automatic Gripper Using Mach 3,” in J. Phys. Conf. Ser., Institute of Physics Publishing, 2019. doi: 10.1088/1742-6596/1254/1/012069.
[20] M. Hanif, M. A. Wibisono, and I. G. B. B. Dharma, “Perancangan Mesin Batik Cap Otomatis Tipe Modul Cap Bergerak,” Prosiding Seminar Nasional Teknik Industri Universitas Gadjah Mada, pp. 87–94, 2017.
[21] R. Kusumawardani and A. Sudiarso, “Perancangan Motif dan Produksi Batik Tulis pada Mesin CNC Batik Tulis untuk Meminimalkan Waktu Pembatikan,” Universitas Gadjah Mada, 2018, Accessed: Jun. 14, 2023. [Online]. Available: http://etd.repository.ugm.ac.id/home/detail_pencarian/163259
[22] P. Devos, “Research and bibliometrics: A long history…,” Clinics and Research in Hepatology and Gastroenterology, vol. 35, no. 5, pp. 336–337, May 2011, doi: 10.1016/j.clinre.2011.04.008.
[23] H. Halepoto, T. Gong, S. Noor, and H. Memon, “Bibliometric Analysis of Artificial Intelligence in Textiles,” Materials, vol. 15, no. 8, p. 2910, Apr. 2022, doi: 10.3390/ma15082910.
[24] L. Waltman, N. J. van Eck, and E. C. M. Noyons, “A unified approach to mapping and clustering of bibliometric networks,” Journal of Informetrics, vol. 4, no. 4, pp. 629–635, Oct. 2010, doi: 10.1016/j.joi.2010.07.002.
[25] T. Tupan, R. N. Rahayu, R. Rachmawati, and E. S. R. Rahayu, “ANALISIS BIBLIOMETRIK PERKEMBANGAN PENELITIAN BIDANG ILMU INSTRUMENTASI,” baca.j.dok.inf., vol. 39, no. 2, p. 135, Dec. 2018, doi: 10.14203/j.baca.v39i2.413.
[26] B. Üsdiken and Y. Pasadeos, “Organizational Analysis in North America and Europe: A Comparison of Co-citation Networks,” Organization Studies, vol. 16, no. 3, pp. 503–5026, 1995, doi: 10.1177/017084069501600306.
[27] M. J. Cobo, A. G. Lopez-Herrera, E. Herrera-Viedma, and F. Herrera, “Science mapping software tools: Review, analysis, and cooperative study among tools,” JOURNAL OF THE AMERICAN SOCIETY FOR INFORMATION SCIENCE AND TECHNOLOGY, 2011.
[28] W. Glanzel, BIBLIOMETRICS AS A RESEARCH FIELD A course on theory and application of bibliometric indicators. 2003. Accessed: Dec. 18, 2022. [Online]. Available: http://nsdl.niscair.res.in/jspui/handle/123456789/968
[29] L. Leydesdorff and I. Rafols, “Interactive overlays: A new method for generating global journal maps from Web-of-Science data,” Journal of Informetrics, vol. 6, no. 2, pp. 318–332, Apr. 2012, doi: 10.1016/j.joi.2011.11.003.
[30] N. J. van Eck and L. Waltman, “Software survey: VOSviewer, a computer program for bibliometric mapping,” Scientometrics, vol. 84, no. 2, pp. 523–538, Aug. 2010, doi: 10.1007/s11192-009-0146-3.
[31] A. E. Minarno, A. S. Maulani, A. Kurniawardhani, F. Bimantoro, and N. Suciati, “Comparison of methods for Batik classification using multi texton histogram,” Telkomnika Telecomun. Compt. Electr. Control, vol. 16, no. 3, pp. 1358–1366, 2018, doi: 10.12928/TELKOMNIKA.v16i3.7376.
[32] A. E. Minarno, Y. Azhar, F. D. Setiawan Sumadi, and Y. Munarko, “A Robust Batik Image Classification using Multi Texton Co-Occurrence Descriptor and Support Vector Machine,” in Int. Conf. Intell. Auton. Syst., ICoIAS, Institute of Electrical and Electronics Engineers Inc., 2020, pp. 51–55. doi: 10.1109/ICoIAS49312.2020.9081833.
[33] A. E. Minarno, F. D. S. Sumadi, H. Wibowo, and Y. Munarko, “Classification of batik patterns using K-nearest neighbor and support vector machine,” Bull. Electr. Eng. Inform., vol. 9, no. 3, pp. 1260–1267, 2020, doi: 10.11591/eei.v9i3.1971.
[34] A. E. Minarno, F. D. S. Sumadi, Y. Munarko, W. Y. Alviansyah, and Y. Azhar, “Image Retrieval using Multi Texton Co-occurrence Descriptor and Discrete Wavelet Transform,” in Int. Conf. Inf. Commun. Technol., ICoICT, Institute of Electrical and Electronics Engineers Inc., 2020. doi: 10.1109/ICoICT49345.2020.9166361.
[35] A. E. Minarno, M. C. Mustaqim, Y. Azhar, W. A. Kusuma, and Y. Munarko, “Deep Convolutional Generative Adversarial Network Application in Batik Pattern Generator,” in Int. Conf. Inf. Commun. Technol., ICoICT, Institute of Electrical and Electronics Engineers Inc., 2021, pp. 54–59. doi: 10.1109/ICoICT52021.2021.9527514.
Published
2023-07-31
How to Cite
Atmaja, D., Herianto, H., Herliansyah, M., & Sudiarso, A. (2023, July 31). Bibliometric Analysis: Research on Batik in International Publications. International Journal of Innovation in Enterprise System, 7(02), 134-144. https://doi.org/https://doi.org/10.25124/ijies.v7i02.226
Section
Production and Service System
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
